Green Frog Designs Chicken Lodge Як збирати - Сторінка 7

Переглянути онлайн або завантажити pdf Як збирати для Сільськогосподарське обладнання Green Frog Designs Chicken Lodge. Green Frog Designs Chicken Lodge 9 сторінок. Small

Друкувати сторінку

Fit the two Back Door Handles to the Back Door using Pi

Clips.

Fit the Side Roof Retainers, one on each side wall, using

Pi Clips.

Fit End Roof Retainers to the Front Wall and Upper Back

Wall using Pi Clips.

Fit the Nest box End Walls and Nest Box Divider to the

Nest Box Floor, then add the Nest Box Front Wall, all

using Pi Clips.

Printed on recycled paper

Fit the Upper Back Wall using Pi Clips and then the Back

Door using Linch Pins. (When fitting, rest the bottom of

the Back Door in the slots in the Base first, push the

door onto the lugs, and slide the Back Door Handle

downwards to lock the Back Door.)

(Note: Skip this step for non-perch models) Slide the

Perches through the Left and Right Side Walls and

secure with Linch Pins at both ends.

Fit the nest box to the house by first inserting the L-lugs

into the lower holes on the Right Side Wall, then tilt the

nest box to push the three upper lugs through their

holes, before securing them inside the house with Linch

Pins.

Page 7 of 9