GANN HYDROMETTE CH 17 Посібник із швидкого старту - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Вимірювальні прилади GANN HYDROMETTE CH 17. GANN HYDROMETTE CH 17 12 сторінок.

Figure 3-2: Start of the installation

Start GANN Dialog Pro after completion of the installation.

The Hydromette CH 17 can now be connected to the PC

via USB cable. Select and confirm the "USB data transfer "

option on the device. The software detects the connected

Hydromette and an information window (Figure 3-3) is

displayed in the lower right corner of the screen.

Figure 3-3: Device has been detected

If any new firmware is available for the device, the notification for this (Figure 3-4) is also displayed.

Figure 3-4: New firmware is available

The menu bar contains the submenu item "Check for Hydromette CH 17 Firmware Updates /

Upgrades" under "Hydromette CH 17 Settings" which takes you to a list of known CH 17 devices. An

entry of the connected Hydromette should be displayed here. Among other things, the device serial

number, the installed firmware and the available firmware are listed here. You can install the latest

software version by clicking on the Update / Upgrade buttons or unlock additional functions for a

new licence.

Figure 3-5: Opening the device list with display of the installed and available firmware versions

Hydromette

CH 17