AFRISO 31813 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Передавач AFRISO 31813. AFRISO 31813 9 сторінок. Differential pressure transmitter
Друкувати сторінкуDMU 10 / DMU 11
6. Decommissioning
When dismantling the device, it must always be done in the depressurized and
currentless condition!
7. Maintenance
In principle, the device requires no maintenance.
If necessary, clean the housing of the device using a moist cloth and a non-aggressive cleaning
solution.
8. Recalibration
The offset value or range value may shift during the life of the device. In this case, a devia-
ting signal value in relation to the set lower or upper measuring range value is output. If one
of these two phenomena occurs after extended use, a recalibration in the factory is recom-
mended. Please note the chapter "Service/Repair" with regard to this.
9. Returning the device
Get in touch with us before returning your product ([email protected]).
A declaration of decontamination must be enclosed with the device for every return, regar-
dless of whether it is for recalibration, decalcification, conversion or repair. Corresponding
templates can be found on our homepage.
Devices without a declaration of decontamination will only be examined after receipt of a
corresponding declaration in case of doubt regarding the medium used!
10. Decommissioning, diposall
Dispose of the product in compliance with all applicable directives, standards and safety
regulations.
1. Disconnect the product from mains.
2. Dismount the product (see chapter "Mounting", reverse sequence of
3. Dispose of the product.
11. Warranty
See our terms and conditions at www.afriso.com or your purchase contract for information on
warranty.
steps).
7