IKEA BLACKSTAD Посібник - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник для Варильна поверхня IKEA BLACKSTAD. IKEA BLACKSTAD 33 сторінки.
Друкувати сторінкуCooktop Installation
1. Visually inspect the cooktop for damage. Also
make sure all cooktop screws are tight (see Fig-
ure 7).
2. Install the retainer brackets. See Figure 8.
The retainer brackets MUST be installed, to
meet local codes or, in their absence, with the
National Electrical Code ANSI/NFPA No. 70—
latest edition (see Figure 8).
Countertop
Cooktop
Spring
Spacer
Retainer
Bracket
3. Set the cooktop into the countertop cutout.
A
During the installation with a wide cutout make sure
the cooktop is centered. A and B gap should have
the same dimensions. The elongated holes on the
bottom of the installation brackets are made to fit
every cutout.
10
Screws
Figure 7
2mm
Screw 1
Figure 8
B
Figure 9
WARNING!
Do not remove the spring spacers on
the edges of the cooktop. These spacers
center the cooktop in the space provided.
The cooktop must be centered to prevent
excess heat buildup that may result in heat
damage or fire (see Figure 10).
4. Fix the cooktop to the bracket using the screws
supplied (see Figure 10).
Hole located
Spring
under the
Spacer (8)
burner box
to fix the
retainer
bracket.
Screw 2
Position brackets on
unit cutout center
line as shown.
Figure 10
Checking Operation
Refer to the Use and Care Guide for operation.
CAUTION!
Do not touch cooktop glass or elements.
They may be hot enough to burn you.
Before You Call for Service
Read the Before You Call for Service Checklist
and operating instructions in your Use and Care
Guide. It may save you time and expense. The
list includes common occurrences that are not the
result of defective workmanship or materials in this
appliance.
Refer to your Use and Care Guide for service
phone numbers.
Retainer bracket (2)
AA-2328606-1