Airflow Uno hab Інструкція

Переглянути онлайн або завантажити pdf Інструкція для Контролер Airflow Uno hab. Airflow Uno hab 2 сторінки. Cavity wall decentralised mechanical ventilation with heat recovery unit
Також для Airflow Uno hab: Посібник з монтажу та експлуатації (16 сторінок), Інсталяційний комплект (16 сторінок), Посібник з технічного обслуговування (2 сторінок)

Supply / Extract

Step 1

Install wall sleeve and external panel. Once the

wall installation sleeve has been fixed in the

drilled core hole (its length can be cut to min.

300 mm), the external panel can be mounted

to the finished facade.

Read the instructions before installation!

8 mm

Wall sleeve ø 160 mm

(Core hole ≥ ø 162 mm with outward gradient)

(Core hole ≥ ø 172 mm horizontal)

Step 2

Insert unit and connect it electrically*. Once

the construction or renovation is complete,

the unit can be inserted in the wall sleeve and

connected electrically. *This product should

only be installed by a skilled competent person

in order to comply with the appropriate Building

Regulations or Standards in place.

QUICK GUIDE

Step 3

Insert internal grille. Once the fan unit has

been installed, the internal grille panel with

integrated filter can be attached. This can be

performed easily without any tools.