IKEA FRAMTID HGC4T Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня IKEA FRAMTID HGC4T. IKEA FRAMTID HGC4T 48 сторінок. Hob
Також для IKEA FRAMTID HGC4T: Інструкція з експлуатації (20 сторінок)
ENGLISH
• Bottom of pans and cooking zones should
be the same size.
Care and cleaning
Warning! Switch the appliance off and
let it cool down before you clean it.
Warning! For safety reasons, do not
clean the appliance with steam blasters
or high-pressure cleaners.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance. Clean the appliance and remove
the residues with water and washing up liquid
after each use. Remove also the remnants of
the cleaning agents!
Scratches or dark stains on the glass ce-
ramic that cannot be removed do not af-
fect the functioning of the appliance.
What to do if...
Problem
The cooking zones will
not switch on or are not
functioning.
The residual heat indica-
tor is not displaying any-
thing.
symbol plus a number
appears on the heat set-
ting display.
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, contact your
dealer or the After Sales Service.
Possible cause
More than 10 seconds passed
since you switched on the hob.
The child safety device is on
The cooking zone was only on for
a short time and is therefore not
hot.
Electronics fault.
Removing the residues and stubborn
residues:
1. Food containing sugar, plastics, tin foil res-
idues should be removed at once, best tool
for cleaning glass surface is a scraper (not
included with the appliance). Place a scra-
per on the glass ceramic surface at an an-
gle and remove residues by sliding the
blade over the surface. Wipe the appli-
ance with a damp cloth and a little washing
up liquid. Finally, rub the appliance dry us-
ing a clean cloth.
2. Limescale rings, water rings, fat splashes,
shiny metallic discolorations should be re-
moved after the appliance has cooled
down using cleaner for glass ceramic or
stainless steel.
Switch the appliance on again.
. Deactivate the child safety de-
vice (See the section "Child safe-
ty device ").
If the cooking zone is supposed
to be hot, call the After Sales
Service.
Disconnect the appliance from
the electrical supply for a few mi-
nutes (Take the fuse out of the
house's electric system) If after
switching on again,
played again, call the customer
service department.
If you operated the appliance wrongly, or
the installation was not carried out by a
registered engineer, the visit from the customer
service technician or dealer may not take
place free of charge, even during the warranty
period.
Remedy
is dis-
8