IKEA LEVERERA Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня IKEA LEVERERA. IKEA LEVERERA 20 сторінок.
Друкувати сторінку
ENGLISH
Heat setting display
-
Daily Use
Switching on and off
Touch
for 2 seconds to switch the
appliance on or off.
Adjusting the heat setting
Touch the control bar at a desired heat
setting. Correct to the left or the right, if
necessary. Do not release before you reach
a desired heat setting.
Activating and deactivating the outer
rings
Switching the oval zone on and off
Switch the oval zone on by touching
1 - 2 seconds. Repeat the procedure to
switch off the outside ring.
Description
Cooking zone is
switched off.
Heat setting is set.
A malfunction oc-
curred.
A cooking zone is
still hot.
The Child Safety
Device or the Lock
is on.
The Automatic
Switch Off is on
for
Heat setting display
Residual heat indicator
Warning! Risk of burns from
residual heat! After you switch
the appliance off, the cooking
zones need some time to cool
down. Look at the residual heat
indicator
.
Use residual heat for melting and keeping
food warm.
Before an outside oval can be
switched on, the inside ring must
be switched on.
Switching the outside rings on and off
Switch on the inside ring before you switch
on the outside rings by touching
seconds. For more outer rings touch the
same sensor field again. The subsequent
indicator comes on. Repeat the procedure
to switch off the outside rings.
Using the Timer
Touch
repeatedly until the pilot light of a
desired cooking zone displays. For example
for the front left zone.
9
Description
STOP+GO is on.
for 1 - 2