IKEA LUFTIG HW400 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня IKEA LUFTIG HW400. IKEA LUFTIG HW400 16 сторінок. Range hood
Також для IKEA LUFTIG HW400: Посібник зі встановлення та використання (8 сторінок), Посібник (16 сторінок), Посібник користувача (16 сторінок)

ENGLISH

the grease ﬁ lter may become dull; this does

not effect its ﬁ ltering capacity.

Grease ﬁ lter maintenance:

1. Disconnect the hood from the electric

power supply.

2 Remove the grease ﬁ lters: pull the spring

release handle downwards, then remove

the ﬁ lter.

3. After cleaning the grease ﬁ lter, remount

in reverse order ensuring the entire

extraction surface is covered.

Charcoal ﬁ lter maintenance (if the hood is

installed in recirculation mode)

1. Remove the grease ﬁ lters.

2. Fit the ﬁ lter/s over the motor according

to the model:

- • align the pins on the cowl with the

slots, then turn the ﬁ lter clockwise until it

locks in place.

3. Reverse the above procedure to remove

the charcoal ﬁ lter.

4. Reﬁ t the grease ﬁ lters,

Charcaol ﬁ lter is neither lavable nor

regenerable.

Replace it every 4 months.

Lamp maintenance

Disconnect the hood from the electricity.

Warning

Prior to touching the light bulbs ensure they

are cooled down.

1. Use a small screwdriver or other suitable

tool to prise off the cover.

2. Snap-ﬁ t the cover back on.

3. Use only max 12V-20W- G4 halogen

bulbs.

Important: make sure you don't touch the

lamp with your hands.