Gantom TL281 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Ді-джейське обладнання Gantom TL281. Gantom TL281 10 сторінок.

INSTALLING ACCESSORIES

The Gantom Juni has a retention ring on the front for holding a polycarbonate lens shield (included with

the fixture), or a third-party sourced dichroic glass filter or plastic gel. For beam shaping and glare

control, Gantom offers a separately sold accessory kit (FA38) which includes an angled cutaway snoot, a

top hat, and a honeycomb hex louver. Please note that a separate retaining ring is included in the FA38

to accommodate the added depth from the hex louver and any additional accessories installed with it.

Installing the accessory: An accessory can be installed by first unscrewing the front retaining ring shown

below.

Once the retaining ring is removed, the accessory can be inserted. Place the accessory in the desired

orientation, then tighten down the retaining ring.

Product Support:

We hope that this guide has been effective for learning how to use your Gantom Juni or Gantom Juni

DMX light fixture. However, if you run into a wiring issue, a bug in the software, or just a light that

doesn't seem to want to cooperate, we at Gantom are ready to help you out! Just send an email to

and we will get back to you as soon as possible.

Gantom Juni User Guide

Version 1.0 – 3/31/2021