Gantom Storm Form Посібник - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник для У центрі уваги Gantom Storm Form. Gantom Storm Form 15 сторінок. Micro gobo projector
Також для Gantom Storm Form: Посібник користувача (15 сторінок)

Друкувати сторінку

To widen the beam move the primary optic forward about 1 mm, and then move the secondary object

backward along the optic slider rails toward the LED until the beam comes back into focus. Repeat this

process until you have your desired projection size. At the maximum beam size, the primary and

secondary optics will be touching each other at about 1/4

of the length of the optic slider rails.

This picture shows the ﬁxture in its widest beam conﬁguration

When you have the beam adjusted to the focal setting you would like, tighten down the set screws on

the primary and secondary optics. Complete the adjustment by screwing the barrel back onto the

ﬁxture.