Bernard Controls BT Посібник із запуску - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник із запуску для Блок управління Bernard Controls BT. Bernard Controls BT 12 сторінок. Separated box

What to check on pre-installed actuators

If you expect a long period between actuator mounting and electrical

wiring:

1. Put desiccant pouches in the actuator or replace the existing

ones.

2. Visually check that cable entries and cover are tightly closed.

2.3 Maintenance

All BT actuators feature lifetime lubrication and therefore require

no specific maintenance, if they were correctly commissioned and

used in conditions foreseen by design.

3.1 Actuator & separated box configuration

Separated box (2) is wired to the actuator (1) through their

respective connection compartments.

Connector (3) connects the whole to power supply and control.







Configuration shown here is an example for illustration





purpose only.

English











10 – Box flange

9 - Handwheel

8 – Control panel

7 – Control cable

6 – Power cable

5 – Control link

4 – Power link

3 - Connector

2 – Separated box

connection

compartment

1 – Actuator

connection

compartment