HIKVISION H1T Series Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження HIKVISION H1T Series. HIKVISION H1T Series 14 сторінок. Turbo hd dome camera
Також для HIKVISION H1T Series: Посібник користувача (14 сторінок), Посібник користувача (15 сторінок), Посібник користувача (17 сторінок), Посібник користувача (17 сторінок), Посібник користувача (14 сторінок)

Steps:

1. Paste the junction box's drill template on the

ceiling.

2. Drill screw holes and the cable hole (optional) in the

ceiling according to the holes of the drill template.

Figure 2-12 Drill Template of the Junction Box

Note:

Drill the cable hole, when adopting the ceiling outlet

to route the cable.

3. Refer to step 3 of 2.2.1 Ceiling Mounting without

Junction Box to take out the camera's main body.

4. Take apart the junction box, and align the screw

holes of the camera with those on the junction

box's cover.

5. Fix the camera's mounting base on the junction

box's cover with three PM4 × 10 screws.

Figure 2-13 Secure Screws on Junction Box's Cover

6. Secure the junction box's body on the ceiling with

four PA4 × 25 screws.

Figure 2-14 Secure the Junction Box's Body on Ceiling

7. Combine the junction box cover with its body by

tightening four screws on junction box's cover.

8. Repeat steps 5 to 9 of 2.2.1 Ceiling Mounting

without Junction Box to complete the installation.

Figure 2-15 Fix the Junction Box