deconta aircontrol S 2 Інструкція з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Монітор deconta aircontrol S 2. deconta aircontrol S 2 20 сторінок. Negative pressure monitor 110v
Друкувати сторінку8.1 aircontrol
Device status
Dynanometer(1 – 8)
Measuring value
After switching on the aircontrol there are 3 information displayed in the top line:
Top left => device status
Possible status indications (S followed by 3 numbers):
First digit 1 to 8
Second digit 1
Second digit 2
Second digit 3
Third digit 1
Top middle => Actual time
Top right => Alarm status
Possible alarm status indications:
A100
Alarm evaluation deactivated
A101
Alarm evaluation is activated, no alarm has been identified
A102
Alarm low identified, the delay time is running
103
Alarm high identified, the delay time is running
A104
External alarm identified, the delay time is running
A112
Alarm low identified, the delay time has expired
A113
Alarm high identified, the delay time has expired
A114
External alarm identified, the delay time has expired.
Underneath the top line, the dynamometer is displayed with the actual measured
negative pressure values.
Instruction manual
aircontrol S 110V
8 Display-indication
Time
Number of the present measuring channels
Optional printer present
Optional memory module present
Printer and memory modules present
Optional communication module present
Indication for inserted
options (e.g. battery)
Alarm status
page 11