Airflow ecoDRY 550 Satin Посібник з монтажу та експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Сушарка Airflow ecoDRY 550 Satin. Airflow ecoDRY 550 Satin 6 сторінок.

Mounting on the Wall

Fix the hand dryer to the wall with the fixing kit provided using the enclosed template to mark out

where the holes should be drilled. It is recommended that you use the raw plugs and screws

provided in the fixing kit. The hand dryer should always be positioned with the air outlet facing

downwards.

Wiring should conform to the latest edition of the IET wiring regulations (BS7671 – 17

Edition) or

the appropriate standard in the country of installation. The ecoDRY 550 requires a 220-240V

50/60Hz supply and an external 3A fuse. An isolator switch should also be installed in the MAINS

input line to facilitate maintenance and cleaning of the dryer.

Safety

Safety first: Always isolate the dryer from the power supply before removing the cover.

When installed according to these instructions the ecoDRY range of hand dryers are completely

safe. The materials used do not constitute a hazard. All ABS parts are made from flame retardant

materials.

Wiring

For hard wiring into a wall in a washroom:

Figure 3

The hand dryer automatically starts up when it senses the hands approaching the air outlet

mechanism and stops when the hands move away. The unit has no heating element - air is heated

by the power of the motor which allows considerable energy savings compared to traditional hand

dryers. The first daily use of the product will therefore blow out seemingly cold air but from the

second drying cycle, the air temperature will warm up.

The device has a system that prevents vandalism – for instance if the sensors are covered to try

and force continuous operation, the hand dryer will only work for 35 seconds and then automatically

stop and go into standby. To resume normal functionality, the cover blocking the sensors will have

to be removed and normal functionality will resume in 3-4 seconds.

Page 3 of 6