IKEA FINSMAKARE Посібник - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник для Вентиляційна витяжка IKEA FINSMAKARE. IKEA FINSMAKARE 36 сторінок.
Також для IKEA FINSMAKARE: Посібник (44 сторінок), Посібник користувача (20 сторінок), Посібник (33 сторінок), Посібник (44 сторінок), Посібник (12 сторінок), Посібник (25 сторінок), Посібник (40 сторінок), Посібник (32 сторінок), Посібник (40 сторінок), Посібник (17 сторінок)

IKEA FINSMAKARE Посібник
ENGLISH
Heat-up indicator
When you turn on a heating function, the
bar on the display comes on. The bar shows
that the temperature increases. When
temperature is reached the buzzer sounds 3
times and the bar flashes and then
disappears.
Fast Heat Up
This function decreases the heat-up time.

Clock functions

Clock functions table
Clock function
Minute Mind‐
er
Duration
End Time
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions:
Duration, End Time, the oven
turns off the heating elements
after 90 % of the set time. The
oven uses the residual heat to
continue the cooking process
until the time ends (3 - 20
minutes).
Application
To set a countdown
(max. 2 h 30 min). This
function has no effect
on the operation of the
oven.
Press
to turn on the
function. Use the shuttle
to set the minutes and
to start.
To set how long the
oven works (max. 23 h
59 min).
To set the switch-off
time for a heating func‐
tion (max. 23 h 59 min).
Do not put food in the oven when
the Fast heat up function works.
This function is not available for some oven
functions.
Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
Setting the clock functions
Before you use the functions:
Duration, End Time, you must set
a heating function and
temperature first. The oven turns
off automatically.
You can use the functions:
Duration and End Time at the
same time if you want to
automatically turn on and turn off
the oven on a given time later.
1. Set a heating function.
2. Press
again and again until the
display shows the necessary clock
function and the related symbol.
3. Use the shuttle to set the necessary time.
4. Press
to confirm.
When the time ends, a signal sounds. The
oven turns off. The display shows a
message.
5. Press any symbol to stop the signal.
Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps prepared
food warm at 80 °C for 30 minutes. It turns
on after the baking or roasting procedure
ends.
17