Ganz ZC-D7000 SERIES Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Камера спостереження Ganz ZC-D7000 SERIES. Ganz ZC-D7000 SERIES 8 сторінок.

INSTALLATION AND ADJUSTMENT

Remove the dome cover.

Insert a ﬂ at-bladed screwdriver into the

groove between the dome cover and the

dome base, and then twist the screwdriver.

Remove the inner cover.

Pull up the inner cover gently when removing.

Installation to the ceiling or wall

Drill holes in the ceiling or a wall.

Mark the position where you want to install the unit on the ceiling or

wall using the template included.

Drill two holes for screws used to attach the camera body and one hole

for cables.

Connect the video and power cables. For cable connection, refer to

page EG-5, "Connecting the cables."

Attach the camera body.

Attach the camera body to the ceiling or

wall.

You can have the cables run on the

exterior surface of the ceiling or wall.

Please use ﬁ xing screws suitable

for the material of the ceiling or wall

when attaching the camera body.

We recommend using screws with a

4mm diameter.

Attaching to the bracket

You can use the tripod screw hole (1/4"

- 20UNC) to attach the camera body to

the bracket.

Tightening the screws with

excessive force may damage the

camera.

EG-4