KitchenAid KICU500 Series Інструкція з монтажу Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Варильна поверхня KitchenAid KICU500 Series. KitchenAid KICU500 Series 12 сторінок. 30" (76.2 cm) electric induction cooktop
Також для KitchenAid KICU500 Series: Інструкція з монтажу Посібник з монтажу (12 сторінок)
Друкувати сторінку
nskx C,oo<'u}p
Excessive Weight Hazard
Use two or more people to move and install cooktop.
Failure to do so can result in back or other injury.
1=
Using 2 or more people, lower the cooktop into the cutout
making sure the clips on each side of the cooktop line up with
the brackets in the cutout.
A
A. Clip
2. Push down on cooktop to snap the cooktop clips onto the
brackets installed in the cutout.
A
/
B
A. Cooktop
B. Cooktop cutout
Mc <® E
ccl Connec
on
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper wire.
Electrically ground cooktop.
Failure to follow these instructions can result in death,
fire, or electrical shock.
This cooktop is manufactured
with a frame-connected,
green (or
bare) ground wire.
1. Disconnect
power.
2. Remove junction box cover if it is present.
3. Connect the flexible cable conduit from the cooktop to the
junction box using a UL listed or CSA approved conduit
connector.
A. UL listed or CSA approved conduit connector
4. Tighten screws on conduit connector
if present.
5. See "Electrical Connection
Options Chart" to complete
installation for your type of electrical connection.
Electrical
Connection
Options Chart
If your home has:
Go to Section:
4-wire
4-Wire Cable from Home
Power Supply
1/2"
(1.3 cm)
3-wire
3-Wire Cable from Home
Power Supply
(1 3 cm)