Bernee BN-5606H0/M0 series Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Цифрова камера Bernee BN-5606H0/M0 series. Bernee BN-5606H0/M0 series 11 сторінок. Integrated speed dome cameras

Друкувати сторінку

92# menu operation:

Set 92#, screen displays camera menu; call 92# or select EXIT button leaving menu. In menu state, WIDE, TELE,

NEAR and FAR means up, down, enter submenu and go back higher level menu. For setting parameter, NEAR and FAR

can increase or decrease numeral value. For Samsung cameras, OPEN and CLOSE are confirm buttons.

Proportional speed-shift:

In accordance with current lens multiples auto adjust speed of rotation.

Alarm linkage: (optional function)

High speed domes support 8-channel alarm input and 2-channel alarm output (middle speed dome serials cameras

support 2-channel alarm-input and 1-channel alarm-output). 1# alarm matches with 101# preset position; 2# alarm

matches with 102# preset position; 8# alarm matches with 108# preset position. Any channel alarms, 2 channels relays

alarm; call 100# preset position, then relays stop outputting.

Point-to-point constant scanning:

After settling start-point and end-point, scan begins with clockwise direction until to the end-point, then scan back

from end-point to start-point. By this way scanning till receiving any command (as sheet below):

Attached chart: command list for dome and camera (all dome models fitted)

Notes: ¤" means this function Available; " N

Preset Position

Dome/Camera Control Content

Number

Run first route (Sequential scan of 1#~16# preset positions)

Run second route (Sequential scan of 17#~32# preset positions)

Run third route (Sequential scan of 33#~48# preset positions)

Run fourth route (Sequential scan of 49#~64# preset positions)

Run fifth route (Sequential scan of 101#~128# preset positions)

Run all sequential scans of confirmed preset positions

Clockwise 360°scan (low speed)

Clockwise 360°scan (middle speed)

Clockwise 360°scan (high speed)

Anti-clockwise 360°scan (low speed)

Anti-clockwise 360°scan (middle speed)

Anti-clockwise 360°scan (high speed)

Set duration time of preset position

Zero calibration

Mirror

Screen Display

Digital zoom

Color

Backlight compensation

84*

Manually switch ICR

Negative image

86*

Auto switch ICR

White balance mode

View state of dome

Exposure mode

Focus mode

Back to Factory Settings

Call menu

View version of dome

Eliminate single preset position (Once more within 5 seconds)

Eliminate all preset positions (Once more within 5 seconds)

Run linear scan / Set start of linear scan

Set end of linear scan

100

Shut alarm-output (be sure alarm-output exists)

Supplement:

Items

Preset Position Range

Preset Position Lasting

Period Setting

Image Vertical-Flip(V-FLIP)

91 Command

detention-time setting is similar to 92#

77#

Cautions:

This manual does not introduce setting methods of detail camera menus. If you want to change

camera parameters, please contact to dealer and ask for setting instructions of menus.

A "

means Not Available

SONY

CANON

1~255

1~128

√ 92#command) √(77#command)

(

√

Call Preset Positions

Off

Manual

CNB

SAMSUNG

1~255

77#command)

- 3 -

Set Preset Position

Auto