Green motion PIPISTREL SKYCHARGE Solo Посібник з технічної документації - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник з технічної документації для Зарядний пристрій Green motion PIPISTREL SKYCHARGE Solo. Green motion PIPISTREL SKYCHARGE Solo 17 сторінок.

Друкувати сторінку

SKYCHARGE – TECHNICAL DOCUMENTATION

MAINTENANCE

In order to prevent any technical failure, Green Motion is performing maintenance services. Please

contact Green Motion Support for more information on maintenance contracts.

Electric shock hazard! Please make sure that the main power supply is turned off before trying to

open the charging station. In any case, working under voltage shall be avoided.

CHECK THAT THE CIRCUIT-BREAKERS ARE OPEN ON THE PANEL BEFORE ANY MANIPULATION

5.1 Troubleshooting

Before any troubleshooting action, please carefully observe the led status colour and read with attention the

indication displays on the screen.

The charging station does not

start

The charging station indicates that

the emergency button is pushed

The charging station visual

indicators are red

Antenna bar graph is red

Authentication refused

The socket visual indicators are

red

The plane is locked to the charging

station

The plane does not charge

Check the power supply on the electrical panel, switch off and reset the circuit-

breaker to restart it.

The emergency button is located underneath the station main case. Turn it for release

until it clicks into open position.

Try to disconnect the plane from the charging station and retry

Check the emergency button, it should be pull out

Check that the connection of the SKYCHARGE to the backend is available / network is

available

Check that you are a recognize and authorized user subscribed to the charging point

operator database

Check that the connection of the SKYCHARGE to the backend is available

Check the power supply on the electrical panel, switch off and reset the circuit-

breaker to restart it.

In some cases, the user must unlock the plug from the plane's dashboard or using the

key control (long press is sometimes required)

In case the user is really not able to remove the cable, press the emergency shutdown

to release the cable. The emergency button must then be set back to its initial position

Check the condition of the Cable GB/T.

Check the power supply on the electrical panel, switch off and reset the circuit-

breaker to restart it.

Try to start and move the plane, then retry to charge

Page 16