IKEA Range Hood Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Вентиляційна витяжка IKEA Range Hood. IKEA Range Hood 8 сторінок. Cooker hood
Також для IKEA Range Hood: Посібник з встановлення та експлуатації (48 сторінок), Посібник з експлуатації та обслуговування (5 сторінок), Посібник зі встановлення та використання (8 сторінок)

Друкувати сторінку

PRODUCT SHEET

1. Control panel.

2. Grease filter

3. Light

4. Steam deflector

5. Telescopic flue

Warning! The hood can support a maximum weight of 5 kg

Bulb maintenance

1. Disconnect the hood from the power supply.

2. Use a small screwdriver or another suitable tool to prise

and remove the lighting unit (Fig.1).

3. Replace the damaged lamp.

4. Only use 20 W max. - G4 halogen lamps, taking care not

to touch them with hands.

5. Close the lighting unit (snap-on).

Grease filters:

The metal grease filter has an unlimited life and must be

washed once a month by hand or in a dishwasher at a low

temperature and with short cycle. Washing in a dishwasher

can cause the grease filter to become opaque, but its filtering

capacity is not affected.

Grease filter maintenance:

1. Disconnect the hood from the power supply.

2. Remove the grease filter/s (Fig. 2). to remove it/them

pull the spring release handle backwards (f1) then remove

the filter/s downwards (f2)

Carbon filter maintenance

(for models with filter installation)

The carbon filter must be washed once a month in a

dishwasher at the highest temperature, using a normal

dishwasher detergent. It is advisable to wash the filters

separately.

After washing, reactivate the carbon filter by drying it in the

oven at 100° C for 10 minutes.

Change carbon filter every 3 years

Fitting the carbon filter:

1. Remove the grease filter (f1/f2 - Fig. 2).

2. Remove the filter holder by turning the knobs 90°

(g - Fig. 3).

3. Fit the carbon filter (i - Fig. 3) in the filter holder (h - Fig. 3).

Proceed in reverse order to refit the filter holder and grease

filter.

5019 618 33090/A

CONTROL PANEL

Light button.

Press the button to switch on the lights.

Extraction speed selection button.

Press the button to select the power/speed.

Keep the button pressed for 2 seconds to go to OFF

status.

Fig. 1

Fig. 2

LI243A