Décor et Jardin 40000S009 Повідомлення про збори - Сторінка 3

Переглянути онлайн або завантажити pdf Повідомлення про збори для Намет Décor et Jardin 40000S009. Décor et Jardin 40000S009 20 сторінок. Garage 15mm
Також для Décor et Jardin 40000S009: Повідомлення про збори (20 сторінок)

Друкувати сторінку

General instructions – Read carefully before you

start

Thank you for buying your shed. We would ask that you

read these instructions carefully before unpacking the

parts.

Storing the packages before assembling the shed

Store the packages in a dry and ventilated place, out of

direct sunlight and protected from the weather (packaging

not waterproof).

The packages and parts should be laid flat on the ground

in order to avoid any deformation.

Assemble the shed as soon as possible after it arrives (the

after sales service is available for a maximum of 10 days

after the date of purchase).

Safety advice

The wooden parts may cause splinters. Handle the wood

carefully, using protective gloves.

Check there are no protruding nails, screws or staples in

the assembled pieces.

Always follow the instructions carefully, keeping to the or-

der in which they are to be assembled.

Assembly

The shed must be built in an area sheltered from strong

winds.

Do not expose the wooden parts or the roof covering to

direct sunlight during assembly.

Start by checking that all parts have been included, us-

ing the inventory provided to identify them by shape and

length.

Before starting, check that the base on which the shed is

to be built is perfectly flat and level.

The with-floor model consists of beams and panels/planks

to be assembled on a solid and stable floor surface. Lay

down supports (concrete beams or blocks, min 40mm

thick) in order to ensure good ventilation.

For the floorless shed models, the concrete slabs should

be the same size or larger than the floor. Check that it is

square by measuring the diagonals.

All parts are the correct size and do not need to be cut

(except some types of crosspieces, glazing stops and the

roofing).

Whilst assembling the shed, regularly check that every-

thing is level and square.

For all parts that need to be assembled using screws, it is

advisable to pre-drill holes in the first part, otherwise there

is a risk that the wood will split when screwing.

Interior reinforcements (for plank-construction sheds)

The reinforcement battens should be placed in the internal

corners in order to fix the points to the main body of the

shed (one single screw at the ends of the reinforcements).

Regularly check these joints, and adjust them according

any movement of the wood (dryness, humidity etc.).

For fixed window frames (depending on the model): Before

screwing, it is advisable to size the mortises and tenons

of the vertical and traverse sections using wood glue (not

supplied).

The crosspieces and glazing stops for the doors and win-

dows are obtained by cutting this wood to the correct

size.

Fixing the shed

Always fix the shed securely to the ground using all appro-

priate methods (not supplied).

For the with-floor model: Fix it to the body of the shed, and

place weight on it as ballast. Fixings are not supplied.

Roof

Start laying the roof covering at the bottom of the roof,

leaving an overhang of 40 mm at the front and back, and

then fold it over the edge of the roof.

For black roofing: Leave a 70mm overhang of roofing on

the side, then fold it under the roof panel and fix it using

large-headed nails (200 mm max).

For green roofing: Leave a 10mm overhand of roofing on

the sides, and fix it using large-head nails (200 mm max).

Finish by affixing the edging planks using screws.

Advice

Pine wood is a living material that never stops moving and

may be slightly deformed (wood slightly bowed or warped)

or have imperfections such as splits, knots and resin pock-

ets.

This is normal and does not affect the lifespan of your shed.

Wood putty (not supplied) may be an easy solution.

For interlocking sheds, note that all planks have a good

face which should face towards the outside of the shed

(the non-visible face may have some planning defects,

bark, splits etc.).

Synthetic panes should not be nailed as there is a risk they

may split. We recommend fixing them with silicone (not

supplied) or pre-drilling the holes before screwing.

Maintenance

It is important to treat the shed using a product for pro-

tecting exterior wood surfaces, containing fungicides, in-

secticides and UV protection. Apply a minimum of 2 coats

to the outside and 1 to the inside. Repeat regularly, as

required.

After Sales Service

Any missing parts or defects must be declared using the

After Sales Service form (available in shops) within 10 days

following purchase of the shed, supported by an invoice or

till receipt.

Our After Sales Service can repair or replace faulty parts.

Any costs for fitting and removal are not included.

Décor et Jardin SA will not be responsible in the event that

a client chooses to alter a product without prior permis-

sion.

For all After Sales Service requests, please ensure that you

adhere strictly to the procedure available in shops (After

Sales Service procedure): You need your till receipt or

proof of purchase, product reference, and exact reference

of the faulty piece.