HIKVISION TURBO HD DS-2CE56H0T-VPITE Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження HIKVISION TURBO HD DS-2CE56H0T-VPITE. HIKVISION TURBO HD DS-2CE56H0T-VPITE 16 сторінок. Turbo hd turret & dome camera
Друкувати сторінку
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and network cable.
7. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle
0° to 75°
Figure 2-22 Type I Camera 2-Axis Adjustment
1). Loosen the tilt adjusting screw to adjust the tilt
position [0° to 75°].
2). Hold the black liner to adjust the pan position [0°
to 355°].
3). Hold the camera body to adjust the rotation
position [0° to 355°].
8. Reinstall the bubble, and tighten the screws.
3 Menu Description
Purpose:
Call the menu by clicking the button
Control interface, or call preset No.95.
Steps:
1. Connect the camera with the TVI DVR, and the
monitor, shown as the figure 3-1.
Camera
2. Power on the analog camera, TVI DVR, and the
monitor to view the image on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking
preset No. 95.
Figure 2-21 Fix the Mounting Base
Figure 2-23 Bubble Reinstallation
Figure 3-1 Connection
0° to 355°
Adjusting Screw
0° to 355°
TVI DVR
on the PTZ
Monitor
button, or call