Ganz ZN-DNT352XE-MIR Короткий посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Короткий посібник користувача для IP-камера Ganz ZN-DNT352XE-MIR. Ganz ZN-DNT352XE-MIR 8 сторінок.

Rebooting

Perform the following procedures to reset your device:

1. Press the Reset button for 2 seconds.

2. The power LED turns to red and Wait for the system to reboot.

Resetting to the Factory Default Settings

If you reset your device to the factory default setting, all parameters including the IP address will be initialized.

For the Factory Default reset:

1. Press reset button and hold for 5 seconds..

2. Release the button when the green Power LED blinks at 150ms interval.

3. The power LED button turns to red and wait for the system to reboot.

To learn more about using other features of your devices, refer to the manual, which is available on the SDK at

the following path.

{SDK root}\DOC\

NC3502 Ver1.3