GREEN SERIES FITNESS CIR-TM7000E-G Процедура оновлення - Сторінка 9

Переглянути онлайн або завантажити pdf Процедура оновлення для Бігова доріжка GREEN SERIES FITNESS CIR-TM7000E-G. GREEN SERIES FITNESS CIR-TM7000E-G 20 сторінок. Suspension upgrade procedure
Також для GREEN SERIES FITNESS CIR-TM7000E-G: Процедура (3 сторінок)

Друкувати сторінку

2.10.

Go to front row #1 suspension. Take out #3 Philips screw and re-tighten 5mm allen bolt

suspension to frame. Estimate is 30 lbs of torque. Best way is to put #2 Phillips screw driver between

deck and frame to keep suspension grommet from going sideways. Note: Make sure the suspension

stays straight and not sideways hitting side of frame.

Now install an additional 8mm – 1.25 locking nut at bottom of suspension frame. While holding

2.11.

#5mm Allen wrench, secure 8mm nut with 13mm socket at estimated 30 – 50 lbs of torque.

www.GreenSeriesFitness.com

©December 2014

Call Toll free at (800) 269-7130