Decorelex F105SIX-LO Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Духовка. Decorelex F105SIX-LO. Decorelex F105SIX-LO 18 сторінок. Built-in oven
Друкувати сторінку
General instructions
· Always switch the appliance on first by pressing the On/Off
· When the selected function is lit, the oven begins to heat up or the time set begins to count down.
· When the selected temperature is reached, an audible signal sounds.
· The oven light is switched on as long as an oven function is started.
The oven light is goes off after 10 minutes when the appliance switched off automatically.
· Switch appliance off using the On/Off
Selecting the oven function
1. Switch on the oven with the On/Off
2. Press the
or
·A suggested temperature appears on the temperature display.
·If the suggested temperature is not changed within approx. 5 seconds, the oven begins to heat up.
Changing the oven temperature
Press the
or
button, to raise or lower the temperature.
The setting changes in steps of 5 ℃.
Thermometer symbol
·The slowly rising thermometer symbol
·The three segments of the thermometer symbol
Changing the oven function
To change the oven function, Press the
Switching off the oven
Switch off the appliance using the On/Off
Speedcook
After an oven function is selected, with the use of the additional function Speedcook
pre-heated in a relatively shore time.
Important: Do not put the food to be cooked into the oven, until Speedcook is completed and the oven is
operating using the desired function.
1. Set the desired function. If necessary, change the suggested temperature.
2. Press the Speedcook
The bars flashing one after another show that Speedcook is operating.
When the temperature set is reached, the bars of the heat indicator light up. An audible signal sounds. The
symbol
goes out.
The oven now continues heating according to the pre-set oven function and temperature. You can now place
the food in the oven.
Memory function
The Memory function can be used to save a setting which is frequently used.
1. Set oven function, temperature and If necessary the clock functions Clock time
2. Press and hold the button
To save another setting, press the button
by the new one.
Starting the Memory function
1. Switch the oven on using the button On/Off
2. Using the button
Clock Functions
Countdown
To set a countdown. A signal sounds after the time has elapsed.
This function does not affect the operation of the oven.
Cook time
To set how long the oven is to be in use.
End time
To set when the oven is to switch off again.
Time
To set, change or check the time(See also section "Before Using for the First Time")
General instructions
button.
button.
button repeatedly until the desired oven function appears.
indicates how hot the oven is as it heats up.
or
button.
button. The symbol
for approx. 2 seconds, until an acoustic signal sounds. The setting is saved.
call up the saved setting.
button.
show that Fast Warm Up is working.
button repeatedly until the desired oven function is displayed.
lights up:
for approx. 2 seconds. The previously saved setting is replaced
.
Page 7 of 17
the empty oven can be
and/or End time
.