KitchenAid KUDC01TM Довідковий посібник для споживачів - Сторінка 4
Переглянути онлайн або завантажити pdf Довідковий посібник для споживачів для Посудомийна машина KitchenAid KUDC01TM. KitchenAid KUDC01TM 20 сторінок. Undercounter dishwasher
Також для KitchenAid KUDC01TM: Інструкція з монтажу (1 сторінок)
Друкувати сторінку
Before using your dishwasher, remove all packaging materials. Read this entire Consumer Reference Guide, as well as the User
Instructions. You will find important safety information and useful operating tips.
For all models:
1. Rinse aid is essential for good drying. Be sure to fill the
dispenser before you use your new dishwasher. Each filling
will last about 1 to 3 months depending on your usage.
2. Scrape large food soil and hard items (toothpicks or bones)
from dishes. You do not need to prerinse your dishes.
3. Properly load the dishwasher. (See "Loading.") Load dishes
with space in between so water will reach the soiled surfaces.
Make sure nothing prevents the spray arm(s) from spinning
freely.
4. Add detergent. Always use a high-quality brand detergent.
(See "Dishwasher Use" in the User Instructions.)
5. Run hot water at the sink nearest your dishwasher until the
water is hot. Turn off water.
4
START-UP
Using Your Dishwasher
6. Press the desired cycle and option selections on the top, or
front, of the dishwasher door. (See "Cycles and Options.")
For all models except KUDI01DL: Press START. Or press
START to repeat the same cycle and options as the previous
cycle. The selected cycle and option lights will flash once.
NOTE: If the dishwasher is not started within 30 seconds after
selecting the cycle and options, it will revert to the last cycle
and options completed.
7. Push door firmly closed. The door latches automatically.
NOTE: The features on your dishwasher may vary from those
in the illustration below.
For Model KUDI01DL:
8. Press the Start pad on the front of the dishwasher door. Or
press the Start pad to repeat the same cycle and options as in
the previous cycle.
NOTE: If the dishwasher is not started within 30 seconds after
selecting the cycle and options, it will revert to the last cycle
and options completed.
IMPORTANT:
When the cycle starts, you will see a rotating pattern of lights
in the display window indicating that the unit is operating. This
pattern will continue for up to 6 minutes while the multiple
sensors check the incoming water temperature, rinse aid
usage and soil level on dishes and cookware.
The cycle countdown pauses and the water heating light
glows while the dishwasher heats the water to a set
temperature. (See "Cycle Selections.")