IKEA ENASTAENDE Посібник користувача - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник користувача для Посудомийна машина IKEA ENASTAENDE. IKEA ENASTAENDE 24 сторінки. Enastående

Друкувати сторінку

ENGLISH

Stains and dry water drops on glasses

and dishes

• The released quantity of rinse aid is not

sufficient. Adjust the rinse aid selector to

a higher position.

• The quality of the detergent can be the

cause.

Dishes are wet

• The programme is without a drying

phase or with a low temperature drying

phase.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the

cause.

• The quality of the combi detergent tab-

lets can be the cause. Try a different

brand or activate the rinse aid dispenser

and use rinse aid together with the combi

detergent tablets.

Refer to 'HINTS AND TIPS' for other

possible causes.

Activating the rinse aid dispenser with the

multitab function activated

1. Press the on/off button to activate the

appliance. Make sure that the appli-

ance is in setting mode, refer to 'SET-

TING AND STARTING A PROGRAMME'.

Technical information

Dimensions

Electrical connection

Water supply pressure

Water supply

Capacity

Power consumption

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water

supply to decrease energy consumption.

2. Press and hold buttons (4) and (5) at the

3. Press button (4).

4. Press button (4) to change the setting.

5. Deactivate the appliance to confirm the

6. Adjust the released quantity of rinse aid.

7. Fill the rinse aid dispenser.

Width / Height / Depth (mm)

Refer to the rating plate.

Voltage

Frequency

Min. / max. (bar / MPa)

Cold water or hot water

Place settings

Left-on mode

Off-mode

same time until the indicators of buttons

(3), (4) and (5) flash.

• The indicators of buttons (3) and (5)

go off.

• The indicator of button (4) continues

to flash.

• The display shows the setting of the

rinse aid dispenser.

setting.

596 / 818 - 898 / 550

(0.5 / 0.05 ) / (8 / 0.8 )

Off

220-240 V

50 Hz

max. 60 °C

0.10 W