HIKVISION DS-2CE12HFT-E Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для ВІДЕОРЕЄСТРАТОР HIKVISION DS-2CE12HFT-E. HIKVISION DS-2CE12HFT-E 17 сторінок. 5 mp colorvu poc camera
Також для HIKVISION DS-2CE12HFT-E: Посібник із швидкого старту (17 сторінок)

Друкувати сторінку

2 Installation

Before you start

Make sure that the device in the package is in good



condition and all the assembly parts are included.

Make sure that all the related equipment is power-off



during the installation.

Check the specification of the products for the



installation environment.

Check whether the power supply is matched with



your power output to avoid the damage.

Make sure the wall is strong enough to withstand



three times the weight of the camera, and the

mount.

If the wall is cement, insert expansion bolts before



installing the camera. If the wall is wooden, use

self-tapping screws to secure the camera.

If the product does not function properly, contact



your dealer or the nearest service center. DO NOT

disassemble the camera for repair or maintenance by

yourself.

2.1 Installation of Type I Camera

2.1.1 Ceiling/Wall Mounting without Junction Box

Before you start:

The installation of ceiling mounting and wall mounting

are similar. Following takes ceiling mounting as an

example.

Steps:

1. Paste the drill template (supplied) to the installation

place.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

3. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

4. Attach the bracket to the ceiling, and secure the

camera with three PA4×25 screws (supplied).

Figure 2-2 Secure the Camera to the Ceiling

5. Connect the cables.

6. Power on the camera to adjust the view angle

according to the figure below.

Figure 2-1 Drill Template