IKEA LAGAN Посібник - Сторінка 5

Друкувати сторінку

• Do not clean with metal scouring pads. Pieces off the

pad can touch electrical parts involving risk of electric

shock.

WARNING

If you see arcing, press the Cancel button and correct

the problem.

ARCING

Arcing is the microwave term for sparks in the oven.

Arcing is caused by:

• Metal or foil touching the side of the oven.

• Foil not molded to food (upturned edges act like

antennas).

• Metal, such as twist-ties, poultry pins, or goldrimmed

dishes, in the microwave.

• Recycled paper towels containing small metal pieces

being used in the microwave.

Federal Communications Commission Radio

Frequency Interference Statement (U.S.A.

Only)

This equipment generates and uses ISM frequency

energy and if not installed and used properly, that is in

strict accordance with the manufacturer's instructions,

may cause interference to radio and television

reception. It has been type tested and found to comply

with limits for ISM Equipment pursuant to part 18 of

FCC Rules, which are designed to provide reasonable

protection against such interference in a residential

installation.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following:

• Reorient the receiving antenna of the radio or

television.

• Relocate the microwave oven with respect to the

receiver.

• Move the microwave oven away from the receiver.

• Plug the microwave oven into a different outlet so

that the microwave oven and the receiver are on

different branch circuits.

The manufacturer is not responsible for any radio or

television interference caused by unauthorized modifi

cation to this microwave oven. It is the responsibility of

the user to correct such interference.

IMPORTANT SAFETY INSTRUCTIONS

UNPACKING AND EXAMINING YOUR

MICROWAVE OVEN

Open the bottom of the carton, bend the carton flaps

back and tilt the microwave oven over to rest on plastic

foam pad. Lift carton off microwave oven and remove

all packing materials, Assembly Instructions, Wall

Template, Top Template, Turntable and

SAVE THE CARTON AS IT MAY MAKE INSTALLATION

EASIER.

• Remove the feature sticker from the outside of the

door, if there is one.

• DO NOT REMOVE THE WAVEGUIDE COVER.

Check to see that there are Assembly Instructions,

Wall Template, Top Template,

enclosures and SAVE the

Read

Check the microwave oven for any damage, such as

misaligned or bent door, damaged door seals and

sealing surfaces, broken or loose door hinges and

latches and dents inside the cavity or on the door. If

there is any damage, do not operate the microwave

oven and contact any IKEA Store.

See Assembly Instructions for more details.

GROUNDING INSTRUCTIONS

This appliance must be grounded. This microwave

oven is equipped with a cord having a grounding wire

with a grounding plug. It must be plugged into a wall

receptacle that is properly installed and grounded in

accordance with the National Electrical Code and local

codes and ordinances. In the event of an electrical

short circuit, grounding reduces risk of electric shock by

providing an escape wire for the electric current.

WARNING

Improper use of the grounding plug can result in a

risk of electric shock.

Turntable Support.

Advice & Instruction.