Gap Diagnostic EASControl Посібник з експлуатації та володіння - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з експлуатації та володіння для Діагностичне обладнання Gap Diagnostic EASControl. Gap Diagnostic EASControl 17 сторінок.

5 Activating

Prerequisites
Have access to the vehicle on which the IIDTool will be used
Ensuring that the vehicle is in a safe environment
Having purchase a transfer of ownership
5.1
App,
Activation using the mobile App
Steps to activate the IIDTool using the App
1- Turn ignition ON without starting the engine (turning the key to "ON, II" or press the "start en-
gine" button without simultaneously pressing the brake pedal).
2- Insert the IIDTool in the vehicle's OBDII connector
3- Wait 30 seconds until the " IIDTool Ready " message is displayed on the instrument pack screen.
This delay is caused by the scan process that detects which ECUs are present.
4- Launch the Mobile Application IIDControl already installed on your compatible mobile device
5- Press "Search for tool" at the bottom of the screen
6- Select the desired tool available in the list ("Available Devices"). If only one device is discove-
red, the App will automatically connect to it.
Figure 6.
App
GAP Diagnostic 05/08/2021 All Rights Reserved
Transfer of ownership
: Activation - > tool selection
guide,
11