Gap Diagnostic IIDTool Посібник з експлуатації та володіння - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник з експлуатації та володіння для Діагностичне обладнання Gap Diagnostic IIDTool. Gap Diagnostic IIDTool 17 сторінок.

5.2.2 Activation using the Integrated (II) Interface

Steps to activate the IIDTool using the Intergrated (II) Interface.
1- Turn ignition ON without starting the engine (turning the key to "ON, II" or press the "start en-
gine" button without simultaneously pressing the brake pedal).
2- Connect the IIDTool on the OBDII connector
3- Wait 30 seconds until the " IIDTool Ready " message is displayed on the instrument pack screen.
This delay is caused by the scan process which detects which ECUs are present.
4- Lunch the Integrated Interface by pressing on the
5- Reach the activation code by browsing through the menus as follows : Menu - > IIDTool Config
- > Unlock Code
6- Note the 10 character activation code.
Note : It is possible to scroll the code from left to right if required with the
7- Send us the activation code by e-mail at
8- Following receipt of the unlock code as a reply to your e-mail (during operating hours
only), return to the vehicle, repeat steps 1 to 5
9- Enter the Unlock Code using the corresponding commands
10- Once the unlock code is entered correctly, the IIDTool will backup the suspension calibration
and Car Configuration File (CCF). A confirmation of execution will be displayed.
The user has now access to advanced programming functions and data backup.
GAP Diagnostic 05/08/2021 All Rights Reserved
Transfer of ownership
button.
guide,
and
buttons.
16