IKEA RENGORA Посібник - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник для Посудомийна машина IKEA RENGORA. IKEA RENGORA 32 сторінки. Ikea dishwasher
Також для IKEA RENGORA: Посібник користувача (24 сторінок), Посібник користувача (48 сторінок), Посібник (24 сторінок), Посібник (28 сторінок), Інструкція з монтажу Посібник з монтажу (16 сторінок), Посібник (28 сторінок), Посібник (12 сторінок), Інструкція з експлуатації (29 сторінок), Посібник (29 сторінок)

Друкувати сторінку

ENGLISH

Installation

INSTALLATION

ATTENTION: If the appliance must be moved at any time, keep it

ATTENTION: If the appliance must be moved at any time, keep

ATTENTION: If the appliance must be moved at any time, keep it

in an upright position; if absolutely necessary, it may be tilted onto

it in an upright position; if absolutely necessary, it may be tilted

in an upright position; if absolutely necessary, it may be tilted onto

its back.

onto its back.

its back.

CONNECTING THE WATER SUPPLY

Connecting the water supply

CONNECTING THE WATER SUPPLY

Adaptation of the water supply for installation should only be

performed by a qualified technician.

performed by a qualified technician

The water inlet and outlet hoses may be positioned towards the

right or the left in order to achieve the best possible installation.

Make sure the dishwasher does not bend or squash the hoses.

Connecting the water inlet hose

CONNECTING THE WATER INLET HOSE

• Run the water until it is perfectly clear.

CONNECTING THE WATER INLET HOSE

• Screw the inlet hose tightly into position and turn on the tap.

• Run the water until it is perfectly clear.

If the inlet hose is not long enough, contact a specialist store or

• Screw the inlet hose tightly into position and turn on the tap.

an authorised technician.

If the inlet hose is not long enough, contact a specialist store or

The water pressure must be within the values indicated in the

an authorised technician.

Technical Data table - otherwise the dishwasher may be function

The water pressure must be within the values indicated in the

properly.

Technical Data table - otherwise the dishwasher may be function

Make sure the hose is not bent or compressed.

Technical Data table - otherwise the dishwasher may be function

properly.

Make sure the hose is not bent or compressed.

Specifications for the connection of the water

Make sure the hose is not bent or compressed.

SPECIFICATIONS FOR THE CONNECTION OF THE WATER

Water supply

SPECIFICATIONS FOR THE CONNECTION OF THE WATER

WATER SUPPLY

Water intake

WATER INTAKE

WATER SUPPLY

Power of water

POWER OF WATER

WATER INTAKE

Pressure

PRESSURE

POWER OF WATER

PRESSURE

Supply hose:

SUPPLY HOSE:

CONNECTING THE WATER OUTLET HOSE

Connecting the water outlet hose

Connect the outlet hose to a drain duct with a minimum

Connect the outlet hose to a drain duct with a minimum diameter

diameter of 2 cm A.

CONNECTING THE WATER OUTLET HOSE

of 2 cm A.

Connect the outlet hose to a drain duct with a minimum diameter

of 2 cm A.

The outlet hose connection must be at a height ranging from

40 to 80 cm from the floor or surface where the dishwasher rests

40 to 80 cm from the floor or surface where the dishwasher

Before connecting the water outlet hose to the sink drain, remove

rests Before connecting the water outlet hose to the sink drain,

the plastic plug B.

remove the plastic plug B.

The outlet hose connection must be at a height ranging from

40 to 80 cm from the floor or surface where the dishwasher rests

ANTI-FLOODING PROTECTION

Anti-flooding protection

Before connecting the water outlet hose to the sink drain, remove

Anti-flooding protection. To ensure floods do not occur, the

Anti-flooding protection. To ensure floods do not occu , the dishwasher

the plastic plug B.

dishwasher is provided with a special system which blocks the

is provided with a special system which blocks the water supply in

water supply in the event of anomalies or leaks from inside the

the event of anomalies or leaks from inside the appliance.

appliance.

ANTI-FLOODING PROTECTION

Some models are also equipped with the supplementary safety

device New Aqua Stop, which guarantees anti-flooding protectio

Anti-flooding protection. To ensure floods do not occu , the dishwasher

device New Aqua Stop, which guarantees anti-flooding protectio

even in the event of a supply hose rupture.

is provided with a special system which blocks the water supply in

even in the event of a supply hose rupture.

Under no circumstances should the water inlet hose be cut as it

the event of anomalies or leaks from inside the appliance.

Model has Water protection system Aquastop

contains live electrical parts.

Some models are also equipped with the supplementary safety

Under no circumstances should the water inlet hose be cut as it

device New Aqua Stop, which guarantees anti-flooding protectio

contains live electrical parts.

even in the event of a supply hose rupture.

Under no circumstances should the water inlet hose be cut as it

contains live electrical parts.

cold or hot (max. 60°C)

3/4"

cold or hot (max. 60°C)

0.05 ÷ 1 MPa (0.5 ÷ 10 bar)

3/4"

7.25 – 145 psi

0.05 ÷ 1 MPa (0.5 ÷ 10 bar)

7.25 – 145 psi

MAX 80 cm

MIN 40 cm

MAX 80 cm

MIN 40 cm

ELECTRICAL CONNECTION

Electrical connection

ELECTRICAL CONNECTION

WARNING: Under no circumstances should the water inlet

hose be cut as it contains live electrical parts.

Before inserting the plug into the electrical socket, make sure

Before inserting the plug into the electrical socket, make sure that:

that:

• The socket is earth and complies with current regulations;

• The socket can

withstand the maximum load of the

• The socket can

withstand the maximum load of the applian-

• The socket can

withstand the maximum load of the applian-

appliance as shown on the data plate located on the inside of

ce as shown on the data plate located on the inside of the door

the door (see PRODUCT DESCRIPTION).

(see PRODUCT DESCRIPTION).

• The power supply voltage falls within the values indicated on

the data plate on the inside of the door.

• The socket is compatible with the plug of the appliance.

If this is not the case, ask an authorised technician to replace the

plug (see AFTER-SALES SERVICE). Do not use extension cables

If this is not the case, ask an authorised technician to replace the

plug (see AFTER-SALES SERVICE). Do not use extension ca-

or multiple sockets. Once the appliance has been installed, the

plug (see AFTER-SALES SERVICE). Do not use extension ca-

bles or multiple sockets. Once the appliance has been installed,

power supply cable and the electrical socket should be easily

bles or multiple sockets. Once the appliance has been installed,

the power supply cable and the electrical socket should be easily

accessible.

the power supply cable and the electrical socket should be easily

accessible.

The cable should not be bent or compressed.

accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, have it replaced by the

The cable should not be bent or compressed.

If the power supply cable is damaged, have it replaced by the

manufacturer or its authorised Technical Assistance Service in

If the power supply cable is damaged, have it replaced by the

order to prevent all potential hazards.

manufacturer or its authorised Technical Assistance Service in

The Company shall not be held responsible for any incidents, if

order to prevent all potential hazards.

these regulations are not observed.

The Company shall not be held responsible for any incidents, if

these regulations are not observed.

Positioning and levelling

POSITIONING AND LEVELLING

1. Position the dishwasher on a level sturdy floor. If the floor i

Position the dishwasher on a level sturdy floo . If the floor i

uneven, the front feet of the appliance may be adjusted until

POSITIONING AND LEVELLING

uneven, the front feet of the appliance may be adjusted until

it reaches a horizontal position. If the appliance is levelled

Position the dishwasher on a level sturdy floo . If the floor i

it reaches a horizontal position. If the appliance is levelled

correctly, it will be more stable and much less likely to move

uneven, the front feet of the appliance may be adjusted until

correctly, it will be more stable and much less likely to move or

or cause vibrations and noise while it is operating.

it reaches a horizontal position. If the appliance is levelled

cause vibrations and noise while it is operating.

2. Before recessing the dishwasher, stick the adhesive

correctly, it will be more stable and much less likely to move or

transparent strip under the wooden shelf in order to protect

Before recessing the dishwasher, stick the adhesive transparent

cause vibrations and noise while it is operating.

it from any condensation which may form.

strip under the wooden shelf in order to protect it from any con-

3. Place the dishwasher so that its sides or back panel are in

densation which may form.

Before recessing the dishwasher, stick the adhesive transparent

contact with the adjacent cabinets or the wall. This appliance

Place the dishwasher so that its sides or back panel are in

strip under the wooden shelf in order to protect it from any con-

can also be recessed under a single worktop.

contact with the adjacent cabinets or the wall. This appliance

densation which may form.

4. To adjust the height of the rear foot, turn the red hexagonal

can also be recessed under a single worktop.

Place the dishwasher so that its sides or back panel are in

bushing on the lower central part at the front of the

To adjust the height of the rear foot, turn the red hexagonal

contact with the adjacent cabinets or the wall. This appliance

dishwasher using a hexagonal spanner with an opening of 8

bushing on the lower central part at the front of the dishwasher

can also be recessed under a single worktop.

mm. Turn the spanner in a clockwise direction to increase the

using a hexagonal spanner with an opening of 8 mm. Turn the

height and in an anticlockwise direction to decrease it.

To adjust the height of the rear foot, turn the red hexagonal

spanner in a clockwise direction to increase the height and in

an anticlockwise direction to decrease it.

bushing on the lower central part at the front of the dishwasher

Dimensions and capacity:

using a hexagonal spanner with an opening of 8 mm. Turn the

DIMENSIONS AND CAPACITY:

spanner in a clockwise direction to increase the height and in

Width

an anticlockwise direction to decrease it.

WIDTH

Height

HEIGHT

DIMENSIONS AND CAPACITY:

Depth

DEPTH

Capacity

WIDTH

CAPACITY

HEIGHT

DEPTH

CAPACITY

598 mm

820 mm

555 mm

13 standard place-settings

598 mm

13 standard place-settings

820 mm

555 mm

13 standard place-settings