IKEA SKINANDE Посібник - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник для Посудомийна машина IKEA SKINANDE. IKEA SKINANDE 48 сторінок. Dishwasher
Також для IKEA SKINANDE: Посібник користувача (24 сторінок), Посібник користувача (48 сторінок), Посібник (24 сторінок), Посібник користувача (4 сторінок), Посібник (48 сторінок), Посібник (16 сторінок), Посібник (32 сторінок), Інструкція з монтажу Посібник з монтажу (16 сторінок), Посібник (28 сторінок), Посібник (28 сторінок)

Друкувати сторінку

ENGLISH

Problem and alarm code

The salt indicator continues

to stay on after replenish-

ment of the salt container.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.

The washing and drying results are not satisfactory

Problem

Poor washing results.

Poor drying results.

There are whitish streaks or

bluish layers on glasses and

dishes.

There are stains and dry wa-

ter drops on glasses and

dishes.

Heruntergeladen von

manualslib.de

• If after 3 or 4 programmes, the salt indicator continues to

stay on, contact the service.

This can occur when you are using salt that needs more

time to dissolve.

There in no unwanted effect on the performance of the

appliance.

• Refer to "Daily use", "Hints and tips" and basket

loading leaflet.

• Use more intensive washing programmes.

• If you use multi-tablets, always switch on the option

Multitab.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

• Tableware has been left for too long inside a closed

appliance.

• There is no rinse aid or the dosage of rinse aid is not

enough. Set the rinse aid dispenser to a higher level.

• Plastic items may need to be towel dried.

• We recommend to always use rinse aid, even in com-

bination with multi-tablets.

• The release quantity of rinse aid is too much. Adjust

the rinse aid level to a lower level.

• The quantity of detergent is too much.

• The released quantity of rinse aid is not sufficient. Ad-

just the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.

Handbücher-Suchmachiene

Possible solution

For alarm codes not described in the table,

contact an Authorised Service Centre.

Possible cause and solution