IKEA TORSBODA Посібник - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник для Посудомийна машина IKEA TORSBODA. IKEA TORSBODA 40 сторінок.
Також для IKEA TORSBODA: Посібник (33 сторінок), Посібник (16 сторінок)
Друкувати сторінку
Additional functions
Additional functions
You can find an overview of the additional functions that can
Additional functions
be selected here. Different additional functions, which can
be found on the control panel of your appliance, are avail-
able depending on the appliance configuration.
ADDITIONAL FUNCTION
Half Load
Features
Features
You can find an overview of the possible features of your ap-
Features
pliance and how to use them here.
These features depend on the model of your appliance.
Top basket
Arrange cups, glasses and small items of tableware in the
top basket.
You can adjust the height of the top basket to make room
for larger items of tableware.
Adjusting top basket with side levers
To wash large items of tableware in the baskets, adjust the
shelf position of the top basket.
Pull out the top basket.
1.
To prevent the basket from suddenly dropping down,
2.
hold the side of the basket by the top edge.
Press in the levers on the right and left on the outside of
3.
the basket.
USE
Switch on with small loads.
●
It is recommended adding less
●
detergent to the detergent dis-
penser than for a full machine
load.
The run time is shortened.
●
Energy and water consumption
●
are reduced.
ADDITIONAL FUNCTION
IntensiveZone
ExtraDry
Raise or lower the basket evenly to the right level.
4.
Check that the basket is level on both sides.
USE
Switch on with mixed loads con-
●
taining tableware with different
soiling levels, e.g. place very
soiled pots and pans in the bot-
tom basket and normally soiled
tableware in the upper basket.
The spray pressure in the bot-
●
tom basket is increased and the
maximum programme temper-
ature held longer. This will in-
crease the run time and energy
consumption.
For a better drying result the fi-
●
nal rinse temperature is in-
creased and the drying phase
extended.
Especially suitable for drying
●
plastic parts.
There is a slight increase in en-
●
ergy consumption and the run
time is extended.
14