ALIBI ali-ipu30 series Посібник зі швидкого встановлення - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Камера спостереження ALIBI ali-ipu30 series. ALIBI ali-ipu30 series 5 сторінок. Ip bullet camera

Друкувати сторінку

Step 5.

Remote Live View screen

After logging into the camera, the Live View - Main stream window initially appears.

Live View options

Screen select tabs

Observe the Live View screen to adjust the direction of the camera. Loosen the adjustable bracket lock nut,

aim the camera at your surveillance target, then tighten the lock nut.

Horizontal

adjustment

set screw

If a horizontal alignment is needed, loosen the horizontal adjust set screw, then rotate the body of the

camera to correct the horizon line. Tighten the set screw.

Adjust the sun shield if necessary to block the lens from bright light.

Step 6.

Adjust the video display

The video Display Settings menu includes the image-related configurable parameters for the camera. It

contains several sub-menus such as Image Adjustment, Exposure Settings, Day/Night Switch, etc. that can

be opened or closed for compactness. Additionally, several adjustments can be seen in the Live View image

on the menu. To open the Display Settings menu, go to Setup tab | Image | Display Settings

www.observint.com

Live View image

Logout button

Capture, Record, Enable e-PTZ icons

Adjustable bracket

lock nut

Sun shield screw

Configurable parameters include:

Switch Day and Night: Select either Auto-Switch or Scheduled-Switch.

•

If using Auto-Switch, open the Day/Night Switch submenu to select the Sensitivity,

—

Filtering Time, and Smart IR feature ON or OFF.

If using Scheduled Switch, set the Start Time and End Time of the switch, then open

—

the Day/Night Switch submenu to select the Smart IR feature ON or OFF.

Also, click the Common, Day and Night tabs to set the Saturation, Hue, Brightness,

Contrast and Sharpness for Day and for Night modes.

Image Adjustment submenu: Open the Image adjustment submenu to set the Saturation, Hue,

•

Brightness, Contrast and Sharpness of the video image. Each parameter can be set to a level of 0

~ 100 either by moving the slider or entering the value in the box on the right. The effect of the

adjustment will appear in the Live View image in the menu.

Exposure Settings submenu: In this submenu, set the following for the best performance:

•

Iris Mode: Select Auto or Manual. Some cameras may not offer both options.

—

Exposure Time: Value ranges from 1/3 to 1/100,000 s. The nominal value is 1/150. Adjust it

—

according to the lightening condition.

Gain: Set the gain to show the optimal brightness level.

—

Day/Night Switch submenu: You can set the Day/Night switch to Day, Night, Auto, or Schedule.

•

The option you select determines the submenu options.

Day or Night: These options both have one parameter: Smart IR.

—

Auto: If you select Auto switch, you can set the sensitivity (0 .. 7), filtering time and Smart IR.

—

Schedule: Use Schedule to set that Start Time and End Time for the switch. Smart IR is

—

also selectable.

Backlight Settings: Backlight settings include BLC Area (Off, Up, Down Left Right Center), the

•

area to control, and WDR (Wide Dynamic Range) ON or OFF.

White Balance: White Balance selection is used to correct colors in the image depending on the

•

lighting source. You can also set the white balance manually (MWB), using Automatic White Balance

(AWB1), and lock the white balance setting (Locked WB).

Image Enhancement: Options in this submenu include Digital Noise Reduction (DNR) ON or OFF.

•

If ON, yo can also adjust the level of noise reduction.

Video Adjustment: Video Adjustment includes:

•

Mirror: Mirror adjustment enables you to flip the image (Up/Down), flip Left/Right (reflect

—

or Center).

Rotate: Rotate rotates the image +90 degrees. Rotate and Mirror can be used to adjust the

—

image in any orientation.

Video Standard: Select 60 Hz for NTSC format.

—

Capture Mode: To make a complete use of the 16:9 aspect ratio, you can enable the capture

—

mode when you use the camera in a narrow view scene.