Avantco 178GDICE49FB Посібник з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Мерчендайзер Avantco 178GDICE49FB. Avantco 178GDICE49FB 18 сторінок. Ice merchandisers
Друкувати сторінку
Part Repair
7. Remove fan motor, blade and cover from
condenser coil by removing 4 Phillips head screws.
(Fig. 34)
Condenser fan blade
8. Remove fan blade from fan motor by removing the
hex head bolt with a 7mm socket. DO NOT lose the
washer. Note fan blade dish and direction. (Fig. 35)
Condenser fan cover
9. Remove fan cover by removing 4 hex nuts with an
7mm socket. (Fig. 36)
Condenser fan motor
10. Unplug the fan motor from the unit wiring. (Fig. 37)
Starting components
11. Remove compressor wiring cover.
12. Removing wiring from compressor. Note wire
locations for new electronics.
13. Remove Phillips screws holding starting
components to condenser tray. (Fig. 38)
Compressor
14. Remove compressor by cutting the suction and
discharge lines.
15. Remove 4 mounting bolts from compressor legs
with a 10mm wrench. (Fig. 39)
Filter drier
16. Remove the filter by cutting the copper lines.
Ensure capillary tube is not damaged. (Fig. 40)
17. Remove from clamp by prying apart clamp clip on
compressor side of clamp. (Fig. 40)
18. Installation is reverse of removal.
19. Check all refrigerant lines, new and old, for leaks.
www.AvantcoRefrigeration.com
12
Service Manual
Ice Merchandisers
Fig. 34
Fig. 36
Fig. 38
Fig. 40
Fig. 35
Fig. 37
Fig. 39