Avantco Equipment 177PC102 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Кухонна техніка Avantco Equipment 177PC102. Avantco Equipment 177PC102 8 сторінок. Electric countertop pasta cooker

Друкувати сторінку

User Manual

•

Drain all water from the tank after every use.

•

Follow Routine Cleaning instructions below.

Routine Cleaning

•

Cleaning the appliance thoroughly on a daily basis is the key to keep it in perfect working condition and prolonging

its life.

•

Clean the appliance with a damp cloth using water and soap or detergents, provided that they are not acidic or

abrasive.

•

Such detergents should not even be used to wash the floor near the appliance, as their fumes may deposit on the

steel surfaces and damage them.

•

If the cooker/rethermalizer is very dirty, use a synthetic scrub sponge. Rinse it off with clean water and wipe it

dry with a clean cloth. Do not rub the appliance with steel wool pads as they could leave rust stains. For the same

reason, avoid touching the appliance with ferrous objects.

•

In order to prevent corrosion spots from forming, ensure that any salt residues are carefully removed from the

tank's sides and bottom.

•

We recommend using Noble Chemical's Spiffy Shine metal polish to clean and polish the outside of your pasta

cooker/rethermalizer. This gentle cleanser is safe to use and doesn't contain any harsh abrasives.

•

Never use direct water jets to clean the appliance because this could result in water entering into it and damaging

it.

Periodic maintenance

•

Deliming The pasta cooker/rethermalizer MUST be delimed periodically (depending upon usage, every 3–4 weeks).

We recommend using Noble Chemicals Lime-B-Gone.

•

Fill tank to MAX. Add two caps of Lime-B-Gone. Turn on machine for 5 minutes and then drain. Please look at

manufactures instructions for more details.

•

Rinse thoroughly at least 3 times before using pasta cooker/rethermalizer after deliming.

Troubleshooting

Problem

Unit is not working

Water is not heating up and indicator

light is ON

Causes

Power Supply

Thermostat Dial has not

been set

Plug/cord damage

Food debris stuck on or

between heating element

Control panel/heating

element is not correctly

positioned

Thermal protector has

been activated?

Thermostat dial has not

been set

Thermostat or heating

element has failed

The heating element is

coated in lime scale

Solution

Check power source

Set the thermostat dial to the desired temperature

Contact place of purchase for warranty coverage

Power off unit, let the unit cool, and then gently

clean on or around elements, removing the food

debris

Gently lift control panel and heating element to

make sure it is sitting in the correction position

Press reset button.

Set the thermostat dial to the desired temperature

Contact place of purchase for warranty coverage

Clean the lime scale off the elements