Avantco Equipment 177BCAB100 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Підігрівач для їжі Avantco Equipment 177BCAB100. Avantco Equipment 177BCAB100 5 сторінок. Bun cabinets and warmers

Друкувати сторінку

User Manual

Introduction

1. Read all instructions before using the product

2. Always follow basic precautions when using electrical equipment in order to minimize the risk of fire, electrical shock,

and injury.

3. Clean machine thoroughly before and after every use.

Safety Instructions

1. Plug the machine into a certified electrical outlet that has a voltage rating that corresponds with the voltage rating on

the machine.

2. Always unplug the model when it is not in use and prior to cleaning. Do not operate unit with a damaged cord or plug

or after it is dropped or any malfunction occurs. Use authorized service for examinations and/or repairs.

3. Exercise extreme caution when the model is used near children and when it is left operating and unattended.

4. Thoroughly clean the unit prior to the first use.

Preparation

1. Set unit on a flat surface.

2. Position unit near a power outlet. Avoid use of extension cords.

3. To avoid electrical damage, make certain that the nameplate voltage is the same as the outlet voltage.

4. Warmer has hot parts. Do not use anywhere near gasoline or other flammable liquids.

5. Make sure electrical connections are in compliance with applicable portions of the electrical code.

6. Prior to first use, it is advised that you clean the rollers of the machine with a soft cloth.

Start Up

1. Unpack and inspect your Bun warmer or drawer for any visible damage. If damage is noted, do not use and contact

the place you purchased the Avantco item.

2. For the bun cabinet, place on a level counter to be used with your Avantco Hot dog grill.

3. For the bun warmer, unwrap the rack and place inside of the warmer. Place on a dry, level counter top near a 120V

outlet. Plug the warmer in and allow 30 minutes for it to reach desired temperature.