CORNING LSE 6781-FP Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Лабораторне обладнання CORNING LSE 6781-FP. CORNING LSE 6781-FP 10 сторінок.

3.0 INSTRUCTIONS FOR USE

1. POWER switch – to turn the shaker ON (power switch illuminates) or OFF

2. SPEED potentiometer – to set the shaker speed

3. TIME potentiometer – to set timed operation

4. HOLD – yellow light illuminates when shaker is set on HOLD for continuous operation

5. START/STOP button to start or stop shaking

6. RUN – green light illuminates when shaker operates

Note: The speed can be adjusted at any time during shaker operation. The time however can not be

changed while the shaker is in motion. To change the time press the STOP button first, allow the shaker

platform to come to full stop and set the time value again. Restart the shaker.

Do not use the shaker near water sources. Be sure that water doesn't get on the device, especially

during the cleaning procedures.

• Do not expose the shaker to caustic or corrosive vapors (e.g. organic solvents).

• Do not insert any objects into the shaker (such as a screwdriver or metal rods).

• Never operate the shaker without platform securely attached.

• Hazardous samples should be shaken only in appropriate containment vessels.

NOTE :

Misuse or unauthorized modifications will waive the warranty rights. If the equipment is used in a manner

not specified by the manufacturer, the safety features of the shaker may be impaired.

Do not shake flammable or explosive samples!