Makita 3901 Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 3901. Makita 3901 12 сторінок. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Також для Makita 3901: Брошура (1 сторінок), Інструкція з експлуатації (16 сторінок), Інструкція з експлуатації (17 сторінок)

Друкувати сторінку

To attach the dust bag, fit it onto the dust nozzle. If the

dust bag becomes an obstacle to your work, turn the

dust nozzle to change the dust bag position.

When the dust bag is about half full, switch off and

unplug the tool. Remove the dust bag from the tool and

pull the bag's fastener out. Empty the dust bag by

tapping it lightly to remove as much of the dust as

possible.

NOTE:

If you connect a Makita vacuum cleaner to your

•

plate joiner, more efficient and cleaner operations

can be performed.

OPERATION

How to make joints

004584

004585

004586

Fig. A

Fig. B

Fig. C

004587

004588

To make joints, proceed as follows:

Fit the two workpieces together as they will

appear in the finished joint position.

Corner Joint (Fig. A)

T-Butt Joint (Fig. B)

Miter Joint (Fig. C)

Frame Joint (Fig. D)

Edge-To-Edge Joint (Fig. E)

Mark the center of the intended biscuit slots on

the workpiece using a pencil.

NOTE:

The center of slots should be at least 50 mm

•

from the outer edge of the workpieces.

Allow 100 mm - 150 mm between slots in

•

multiple biscuit application.

For Corner Joint and T-Butt Joint only

004589

Clamp the vertical workpiece to the workbench.

For Miter Joint only

Fig. D

Fig. E