Makita 3901 Інструкція з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 3901. Makita 3901 17 сторінок. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Також для Makita 3901: Брошура (1 сторінок), Інструкція з експлуатації (16 сторінок), Інструкція з експлуатації (12 сторінок)
Друкувати сторінку
1
2
3
1. Lock nut
2. Circular saw blade
3. Inner flange
4. Blade cover
1
1. Rubber facing
2. Blade cover
For T-Butt Joint only
004602
•
Fit the two workpieces together as they will appear in the finished joint
position.
•
Lay the vertical workpiece on the horizontal one. Clamp both workpieces
to the workbench.
•
Remove the angle guide from the tool.
•
Follow the steps 2, 4, 6, 7, 8 and 11 described above.
004603
How to trim wall or ceiling panels
004604
First unplug the tool. Open the blade cover and replace the existing cutter
4
blade with an optional circular saw blade 110 mm in diameter.
Refer to the "Removing or installing the blade" section which was described
previously. Remove the rubber facing from the base. Then close and secure
the blade cover. Now the max. depth of cut is 25 mm.
CAUTION:
•
Be very careful that the blade has been properly mounted on the tool
spindle between the inner flange and the lock nut. Be sure to securely
tighten the lock nut.
004605
2
13