Makita 4304 Інструкція з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 4304. Makita 4304 20 сторінок. Variable speed
Також для Makita 4304: Посібник користувача (8 сторінок)
Друкувати сторінку
Guide rule (rip fence; optional accessory)
When cutting widths of under
150
mm
(5-29/32")
repeatedly, use of the guide
rule will assure fast, clean, straight cuts. To
install
it,
loosen the bolt on the front of
the base. Slip in the guide rule and secure
the bolt.
Circular guide (optional accessory)
Use of the circular guide insures clean,
smooth cutting of circles under 200 mm
(7-7/8") in radius. Insert the pin through
the center hole and secure it with the
threaded knob. Move the base of the tool
fully forward. Then install the circular
guide on the base in the same manner as
the guide rule (rip fence).
Vacuum head (optional accessory)
The vacuum head is recommended to per-
form clean cutting operations. Install the
plastic cover on the tool by fitting
it
into
the notches in the tool.
Guiderule-
u
Pin
Fit into notches
Base
Plastic cover
13