FRIGOGLASS Flex 35 HC Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Мерчендайзер FRIGOGLASS Flex 35 HC. FRIGOGLASS Flex 35 HC 13 сторінок.

Друкувати сторінку

ENG

FOR AUTHORIZED SERVICE PERSONNEL ONLY

It is mandatory that the Customer performs the following operations during the Maintenance of an ICM

once or twice a year, using a vacuum cleaner:



Cleaning of the condenser



Cleaning of the dust filters (if applicable).

If the ICM is placed in an environment where dust is accumulated on the condenser, then the

condenser has to be cleaned more often.

Additionally, it is recommended that the following operations are carried out during preventive

maintenance:

1. Mechanical System:



Check that the equipment is correctly positioned and leveled.



Check that the front and back grid are fixed in place.



Check the self-closing system of the door.



Check that the fan support and fan grid are fixed in place.



Check the draining system and unclog if necessary.

2. Electrical System:



Check the power cable (replace if needed).



Check the illumination system.



Check the electrical connections.



Check that the electrical box cover of the thermostat or the electronic controller is properly

installed.

HANDLING & TRANSPORTATION GUIDELINES

The merchandiser should always be transported:



in upright position (unless otherwise authorized by the supplier)



with the doors closed and stoppers for the sliding door models



in its original packaging or similar one.

Cooler temperature during storage or transportation should not be below

-20

C or above +60

PREVENTIVE MAINTENANCE GUIDELINES

PRIOR TO ANY CLEANING OR MAINTENANCE PROCEDURE (INSIDE OR

OUTSIDE THE DEVICE), UNPLUG THE ICM! REMOVE THE PLUG AND

MAKE SURE THAT THE OPERATOR CAN CHECK FROM ANY OF THE

POINTS WHICH HE HAS ACCESS THAT THE CABLE IS UNPLUGGED.

APPENDIX A

APPENDIX B