CORNING PC-600D Інструкція з експлуатації - Сторінка 13

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Лабораторне обладнання CORNING PC-600D. CORNING PC-600D 14 сторінок. Digital hot plates, stirring hot plates, stirrers, and external temperature controller
Також для CORNING PC-600D: Інструкція з експлуатації (11 сторінок), Інструкція з експлуатації (8 сторінок), Інструкція з експлуатації (14 сторінок)

14.0 Limited Warranty

Corning Incorporated (Corning) warrants that this product will be free from defects in material

and workmanship for a period of two (2) years from date of purchase. CORNING DISCLAIMS

ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. Corning's sole

obligation shall be to repair or replace, at its option, any product or part thereof that proves

defective in material or workmanship within the warranty period, provided the purchaser

notifies Corning of any such defect. Corning is not liable for any incidental or consequential

damages, commercial loss, or any other damages from the use of this product.

This warranty is valid only if the product is used for its intended purpose and within the

guidelines specified in the supplied instruction manual. This warranty does not cover damage

caused by accident, neglect, misuse, improper service, natural forces, or other causes not

arising from defects in original material or workmanship. This warranty does not cover motor

brushes, fuses, light bulbs, batteries, or damage to paint or finish. Claims for transit damage

should be filed with the transportation carrier.

In the event this product fails within the specified period of time because of a defect in

material or workmanship, contact Corning Customer Service at: USA/Canada 1.800.492.1110,

outside the U.S. +1.978.442.2200, visit www.corning.com/lifesciences, or contact your local

support office.

Corning Customer Service will help arrange local service where available or coordinate

a return authorization number and shipping instructions. Products received without proper

authorization will be returned. All items returned for service should be sent postage prepaid

in the original packaging or other suitable carton, padded to avoid damage. Corning will not

be responsible for damage incurred by improper packaging. Corning may elect for onsite

service for larger equipment.

Some states do not allow limitation on the length of implied warranties or the exclusion

or limitation of incidental or consequential damages. This warranty gives you specific legal

rights. You may have other rights which vary from state to state.

No individual may accept for, or on behalf of Corning, any other obligation of liability,

or extend the period of this warranty.

For your reference, make a note of the model number, serial number, date of purchase,

and supplier here.

Model No. ________________________

Serial No. _________________________

According to Directive 2012/19/EU of the European Parliament and Council

of 4th July 2012 on waste and electronic equipment (WEEE) as amended, the

Corning® Digital Hot Plates, Stirring Hot Plates, and Stirrers are marked with

the crossed-out wheeled bin and must not be disposed of with domestic waste.

Consequently, the buyer shall follow the instructions for reuse and recycling

of waste electronic and electrical equipment (WEEE) provided with the

products and available at the following link: www.corning.com/weee.

Date Purchased _________________________

Supplier _______________________________

Instruction Manual