Avantco Equipment 178GDC10HC Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Комерційне харчове обладнання Avantco Equipment 178GDC10HC. Avantco Equipment 178GDC10HC 7 сторінок. Commercial refrigerator and freezer

Друкувати сторінку

User Manual

Trouble Shooting

Compressor is Not Running

Fuse blown or circuit breaker tripped.

Power cord unplugged.

Thermostat set too high.

Cabinet in defrost cycle.

Cabinet Temperature is too Warm

Thermostat is set too high.

Airflow is blocked.

Low refrigerant levels.

Door is slightly ajar.

Interior Light is Not Working

Poor switch connection.

Bulb is not connected.

Bulb has burned out.

Condensation is Collecting on the Cabinet and/or Floor

Gasket is not sealing properly.

Replace fuse or reset circuit breaker.

Plug in power cord

Set thermostat to lower temperature.

Wait for defrost cycle to finish.

Set thermostat to lower temperature.

Re-arrange products to allow for proper air flow.

Make sure there is at least four inches of clearance

from the fan.

Contact a service technician to chek refrigerant levels.

Make sure door is completely closed.

Turn off light switch and turn it back on.

Make sure the bulb is correctly inserted in the socket.

Replace the bulb.

Clean, repair, or replace the gasket as necessary.

- 6 -