Garage Tek GT1309E Інструкція з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Висувна шухляда для LCD-дисплея Garage Tek GT1309E. Garage Tek GT1309E 2 сторінки. Drawer-basket

Друкувати сторінку

DRAWER - BASKET ASSEMBLY INSTRUCTIONS

STEP 1

STEP 2

STEP #1: CHECK PARTS RECEIVED.

STEP #2: TIP: IT IS MUCH EASIER TO MOUNT THE DRAWER TO THE TABLE TOP IF THE TOP IS LAYING

"UPSIDE" DOWN ON THE FLOOR AS SHOWN. HOWEVER, THE DRAWER CAN CERTAINLY BE INSTALLED

WITH THE TABLE TOP INSTALLED ALSO.

PLACE THE DRAWER NEAR THE FRONT EDGE OF THE TABLE TOP AND CENTERED LEFT / RIGHT AS YOU

DEISIRE.

STEP 3

STEP 4

STEP #3: MEASURE / POSITION THE SIDE PANELS 4" FROM THE TABLE TOP FRONT EDGE AS SHOWN.

STEP #4: MARK THRU THE FASTENER OPENINGS; MOVE THE DRAWER ASIDE AND PREDRILL HOLES FOR

THE SCREWS. BE CAREFUL NO TO DRILL THRU THE TABLE TOP.

REPOSITION THE DRAWER AND DRIVE THE SUPPLIED SCREWS IN PLACE. THE ASSEMBLY IS COMPLETE.

PG 2