Avantco Equipment 177ID18SBSA Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Діапазони Avantco Equipment 177ID18SBSA. Avantco Equipment 177ID18SBSA 12 сторінок. Double drop-in induction range
Друкувати сторінкуControl Panel
Lock
Key
Safety Functions
Safety
Indicates
Code
Without Cookware or
EO
Non-usable Cookware
E1
Low-Voltage
E2
High-Voltage
Top Plate Sensor Overheat
E3
or Short Circuit
www.AvantcoEquipment.com
LED Display
LED Display
Rear Burner
Timer Controls
Controls
Please make sure to you are using the correct and high quality induction-ready
cookware. Steel, cast iron, enameled iron, or stainless steel with flat-bottom
pans / pots with diameter from 5" to 10".
•
Unit will not switch ON to heat
•
Unit will switch to Standby mode after 1 minute
It E1 occurs when the voltage is lower than 100V;Please ensure Voltage><100V.
It E2 occurs when the voltage is higher than 280V;Please ensure Voltage >280V.
1.
When the temperature of sensor overheat and boil dry protection is activated
(which can be caused when the temperature of cookware is over 450°F) during
cooking, the E3 occur; the induction cooker needs to be turned off, unplugged
and allowed to cool. Then you can turn it back on.
2.
If E3 occurs after following step above, then sensor has failed. Please contact
customer service.
User Manual
LED Display
Front Burner
Controls
Procedure
ON/OFF
Key
11