Avantco Equipment IC1800 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Діапазони Avantco Equipment IC1800. Avantco Equipment IC1800 5 сторінок. 1800 watt induction range

Друкувати сторінку

User Manual

Operating of the Device

Caution! Never leave the appliance unattended when it is in operation!

Please follow the sequence below when adjusting the appliance. You can adjust power Levels, (1-15) and temperature

(degrees Fahrenheit) by turning the knob and cooking time (minutes) by using the switches " +" or "-".

Power levels: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15

Temperature levels: 140 / 150 / 160 / 170 / 180 / 190 / 200 /210 / 220 / 230 / 240 / 250 / 260 / 270 /

280 / 290 / 300 / 310 / 320 / 330 / 340 / 350 / 360 / 370 / 380 / 390 / 400 / 410 / 420 / 430 / 440 / 450 / 460 °F

Time presetting: 0 – 175 minutes (in 5 minute increments) (will default to 175 if not set)

Tip:

When turning on the unit, it will default to power level 6.

• Before plugging in always place suitable cookware filled with food onto the induction cooking plate. Otherwise error

function will occur (see "Safety functions").

• Insert the plug into a suitable socket.

• The display shows first 000 and then automatically switches into Standby Mode.

• Now press the ON/OFF switch to turn the device on. A short tone will sound. (Whenever you press a button again

or a new button, a short signal tone will sound). The fan inside begins to work. The display now shows 6. This is an

automatic presetting. The appliance is now in the Power Level Mode. Select the desired power level higher or lower by

Knob. You can make adjustments of power mode manually by turning the Knobs.

• To select the desired temperature press the button "Heat /Hold'. Now the appliance is in Temperature Mode. This is

recommended for Holding Temperature on chafers or cookware. Select the desired temperature level higher or lower

by turning the Knobs (adjustable from 140° to 460°F).

• If desired, press the button "Time" to program the cooking time. Adjust the desired cooking time by pressing the

arrow buttons. The time is adjustable from 0 – 175 minutes (in 5 minute increments).

**This is an optional timer. If you do not set the timer, it will default to 175 minutes and then shutoff for safety reasons.

Cooking time will be indicated at the display by counting down the minutes. When cooking time is finished this will be

indicated by several acoustic signals and the unit will switch off automatically. After finishing the cooking or keeping

warm process, always switch off the device and unplug. All functions can be adjusted manually by pressing the

corresponding buttons. Overheating of cookware will activate the boil dry protection of the device.

Safety Functions

Error Message

Cause

E00

No cookware on plate or non-usable cookware.

E01

The cooker has become too hot

(e.g. due to blocked ventilation slots).

E02

Overheating-protection was activated

and the cooker has switched off.

E03

Temporary voltage overlad. Cooker

became too hot.

Solution

Place suitable cookware on cooking plate.

Clear vents, let cooker cool down before restarting.

If error message continues contact retailer.

Remove cookware from cooker and let unit cool

down before restarting.

Let cooker cool down before restarting.