CORNING ALTOS Riser Cable Встановлення захвата для витягування дротяної сітки - Сторінка 3

Переглянути онлайн або завантажити pdf Встановлення захвата для витягування дротяної сітки для Кабелі та роз'єми CORNING ALTOS Riser Cable. CORNING ALTOS Riser Cable 3 сторінки.

Друкувати сторінку

Issue 5

4.12 Connect the pulling eye to the appropriate ball

bearing swivel and pulling tape or rope (Figure 9). The

grip installation is now ready for the cable pull.

Pulling line

Swivel

Figure 9

Grip Removal

5.1 To remove the pulling grip after completion of the

pull:

a) Cut the cable 3 ft (91 cm) behind the grip.

b) Place a protective cap over the exposed cable end

and tape in place to prevent water intrusion.

c) Store the coiled splicing slack so that it is protected

from damage.

Special Note:

Fiber Optic

Training

Program

Corning Cable Systems offers comprehensive, integrated training pro-

grams. Courses are structured for: Telephony, CATV, LAN, Intelligent

Transportation Systems and Power Utilities.

For information on Engineering Services Training call: 800-743-2671.

SRP-005-044

Corning Cable Systems reserves the right to improve, enhance, and modify

the features and specifications of Corning Cable Systems' products without

prior notification.

All trademarks are the property of their respective holders.

Corning Cable Systems is ISO 9001 certified.

Printed in U.S.A.

Corning Cable Systems LLC

PO Box 489

Hickory, NC

28603-0489 USA

For US and Canada 1-800-743-2673

International

FAX: 828-901-5973

http:www.corning.com/cablesystems

828-901-5000

Page 3