CORNING ClearCurve SRP-005-065 Посібник із швидкого старту - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Кабелі та роз'єми CORNING ClearCurve SRP-005-065. CORNING ClearCurve SRP-005-065 4 сторінки. Drop cable pulling grip kit

Друкувати сторінку

Step 5:

If you are using a pulling line:

a) Tie the end of the mesh grip using

the appropriate knot such as a

square knot (Figure 9) or a fisher-

man s knot.

b) Tape over the knot as you did the mesh grip and cable (Figures 10 and 11).

You are now ready to pull the ClearCurve Drop assembly through duct.

CAUTION: Do not exceed 50 lbs pulling tension when installing the cable.

Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA

800-743-2675 • FAX: 828-901-5973 • International + 1-828-901-5000 • www.corning.com/cablesystems

Corning Cable Systems reserves the right to improve, enhance, and modify the features and specifications of Corning Cable Systems products without prior notification. ClearCurve Drop is a

trademark of Corning Cable Systems Brands, Inc. All other trademarks are the property of their respective holders. Corning Cable Systems is ISO 9001 certified.

STANDARD RECOMMENDED PROCEDURE 004-120 | Issue 1 | FEBRUARY 2009 | PAGE 4 OF 4

Mesh grip

Figure 9 — Square knot

Figures 10 and 11 — Taping the pulling line knot

Pulling line